To Learn More Contact
Custom-built for a multi-boat owner and life-long sailor, CAVU has been meticulously maintained with an open checkbook since her launching. CAVU has only been used seasonally in New England waters and her stem to stern upgrades make her an excellent alternative to a new build. Launched in June after her annual, indoor storage and extensive winter maintenance program, CAVU is moored on Narragansett Bay for the 2018 summer season and being offered for sale due to the owner’s inability to use her as planned.
PACUYS - AYS would love to guide you through a personal showing of this 42' Hinckley Sou'wester 42 MK II Sloop 1996. This yacht for sale is located in Enroute Portsmouth, Rhode Island and priced at $389,000. For a showing please contact us by filling out the form on this page and we will get back to you shortly!
Sou'wester 42 MK II Sloop
Yanmar 4JH2E fwc diesel
1055.00 HRS 48.00 HP
1055.00 HRS 48.00 HP
The Sou'wester 42 is a timeless model within the Hinckley lineup, one that has been admired for its beauty and sailing characteristics around the world. CAVU is Hull #68 of 77 built and is appointed, equipped, and maintained to the highest standards.
CAVU’s hull was constructed using the SCRIMP process to vacuum-infuse vinylester resin in a single step into a cored laminate of Kevlar/E-glass. Kevlar fabric greatly increases the strength of the hull against damage impacts and the aircraft grade balsa core provides the greatest degree of stiffness and thermal/acoustic insulation. The skin coat is chopped mat in low-shrink vinylester resin to provide a superior surface finish and a greater resistance to water osmosis. Core is removed and the hull is reinforced with additional layers of fiberglass in stress areas. A fiberglass hull stringer system is bonded to the hull and integrated with the mast step and engine mounts to form a single unit that is strong and light.
The deck and house are Scrimp-molded in one piece incorporating a hybrid knit fabric of Kevlar/E-glass and a core of aircraft grade balsa which is deleted in major penetration and stress areas and replaced with solid layers of reinforcing fiberglass. The hull is laid up with a 4" recessed flange to receive the deck which is bonded to this surface with reinforced polyester adhesive. It is thru-bolted on 8' centers with additional fastenings in the area of the toe rail tracks, thus ensuring a strong, permanent, and watertight hull/deck joint.
The aft, T-shaped Cockpit has a naturally-maintained teak sole and its teak-rimmed coaming is varnished, stepped-down, and wider adjacent to the wheel for comfortable outboard seating. The water-tight, opening cockpit seats have molded non-skid. The sail and equipment locker to port can be locked from the main cabin and has a stainless steel line rack and a custom light. The cockpit includes a propane locker with vent. There are four stainless steel-trimmed winch pockets in the cockpit coaming.
Pedestal wheel steering has a 38" stainless steel destroyer-type wheel with elkhide covered rim (redone 2018), stainless steel guardrail, GPS chartplotter (new 2017), engine controls, watertight, 12-volt outlet, and a stainless steel-housed 6" binnacle compass and binnacle guard. A complete range of engine instruments and switches are recessed in locations handy to the helmsman. Sailing instruments are above the companionway.
CAVU has a SW42 MKII standard "Dinette" arrangement that sleeps up to six in two cabins with a total of three separate sleeping areas. Her interior finish is satin-varnished cherry with gloss highlights, louvered cherry locker fronts, and custom "flame" cherry solid locker doors. Her overhead is white formica with dome lights and her cabin sole is gloss varnished teak and holly (completely removed and refinished in 2014). All inset, removable floor hatches are lockable for offshore sailing. Hanging lockers are cedar-lined.
Situated to port, the Head is finished in white formica with (2) vented, cherry locker doors and cherry trim.
The full-width cabin is amidships and to port is the U-shaped Dinette and fold-down, varnished, cherry table. A dimmable, halogen light is overhead.
The custom, outboard dinette seat pulls inboard to form double berth. Generous storage behind berth.
To Starboard: Forward is a full-length, cedar-lined hanging locker. Aft of the hanging locker is a two-drawer cabinet with a locker above containing 110V and TV antenna outlets. Continuing aft is a curved settee/transom berth with storage behind and two lockers and bookshelf above/outboard.
Situated to port, the U-shaped Galley is separated from the main salon by a partial bulkhead with a varnished cherry cut-out grab rail.
Lockers, shelves, bin, and drawer storage areas are available for foodstores and galleyware. Pull-out trash bin and built-in dustpan recessed-into cabin sole.
To starboard, opposite the galley and aft of the main saloon settee is the forward-facing Nav area separated by a partial bulkhead.
AFT QUARTER BERTH:
The single, Quarterberth is aft of the nav station and lined with cherry sheathing. Vented, sliding storage lockers are outboard running the length of the berth. The hot water tank is accessible at the aft end of the berth. This area includes a 12-volt Hella fan, a stainless steel Ocean Frigast light, an overhead dome light, and (4) hooks for life jackets, foul weather gear etc.
On center-aft is the Cockpit Companionway with screens, and port and starboard handrails. The (3) companionway doors are varnished teak and stored via integrated track on the companionway slide.
Carbon fiber electric Stoway mast with (2) manual winches mounted to port and starboard.
12-Volt DC electrical system:
110-Volt AC System:
All circuits are circuit breaker protected at the nav station panel which is equipped with both voltmeter and ammeter. Master switches are provided for starting, lighting, primary winches, secondary winches, and windlass circuits.
All circuits, major mechanical components, and rigging are grounded to the keel with heavy copper strapping and the mast is lightning protected.
Yanmar 4JH2E FWC 48-hp diesel engine with 1,055 hours (July 2018) with 2:1 reduction gear, dripless shaft seal (replaced 2010), Aquamet 22 stainless steel shaft and 3-blade feathering Max-Prop.
This listing is presented to you courtesy of a member of the International Yacht Brokers Association and may be centrally listed with another broker. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.